Linkus Web Client CTI Overview

Linkus Web Client can be used in either softphone mode or CTI mode. This topic describes what is softphone mode and CTI mode, what call operations you can do in each mode, and compatible IP phones.

Softphone mode

A softphone is a software-based phone that is equivalent to a traditional deskphone, which allows you to make and receive calls over the Internet via a computer. A softphone not only has all the features of a deskphone, but also has additional features typical for online messaging, such as chat, video call, extension presence, etc.

If you don't have a deskphone in the office, you can set Linkus Web Client to softphone mode. In this way, you can perform the following operations to manage phone calls on your computer:
  • Make/End a call
  • Make a second call
  • Answer/Reject a call
  • Mute/Unmute a call
  • Transfer a call (attended transfer and blind transfer)
  • Record a call
  • Hold/Resume a call
  • Swap hold

CTI mode

Computer Telephony Integration (CTI) connects a computer with a telephone system, which allows you to control a phone from your computer.

If you prefer a deskphone for communication, you can set Linkus Web Client to CTI mode. In this way, Linkus Web Client acts as a visual control panel on which you can perform the supported call operations, whereas calls are made and received from the connected phone.

You can control IP phones via Linkus Web Client CTI. Supported operations to manage calls via CTI vary from phone models. Refer to the following table for details.
Note:
Table 1.
Operations Compatible Yealink / Fanvil / Snom IP phones Other IP phones
Make/End a call
Make a second call ×
Answer a call ×
Reject a call
Hold/Resume a call
Mute/Unmute a call × ×
Blind transfer a call
Attended transfer a call ×
Record a call
Swap hold ×

Compatible Yealink IP phones

Compatible Fanvil IP phones

Table 3.
Phone Model Firmware Version
X1S/X1SP 2.2.12 or later
X1SG 2.2.12 or later
X3SG 2.2.12 or later
X3U 2.2.12 or later
X2/X2P 2.14.0.7386 or later
X2C/X2CP 2.14.0.7386 or later
X3S/X3SP/X3G 2.14.0.7386 or later
X4/X4G 2.14.0.7386 or later
X4U 2.2.11 or later
X4U-V2 2.12.1 or later
X5U 2.2.11 or later
X5U-V2 2.12.1 or later
X5S 2.2.1 or later
X6 2.2.1 or later
X6U 2.2.11 or later
X6U-V2 2.12.1 or later
X7 2.2.11 or later
X7C 2.2.11 or later
X7A 2.2.0.229 or later
i56A 2.8.13 or later
A32 2.6.0.408 or later
A32i 2.6.0.408 or later
X210 2.2.11 or later
X210i 2.2.11 or later
X7-V2 2.12.1.3 or later
X7C-V2 2.12.1.3 or later
X210-V2 2.12.1.3 or later
X210i-V2 2.12.1.3 or later
X3S/X3SP Lite 2.4.5 or later
X3S/X3SP Pro 2.4.5 or later
X3SW 2.4.5 or later
X3SG Lite 2.4.5 or later
X3SG Pro 2.4.5 or later
X3U Pro 2.4.5 or later
V62 2.4.10 or later
V64 2.4.10 or later
V65 2.12.2.4 or later
V67 2.6.0 or later

Compatible Snom IP phones

Phone Model Firmware Version
D120 10.1.54.13 or later
D140 10.1.148.1 or later
D150 10.1.148.1 or later
D315 10.1.73.16 or later
D335 10.1.73.16 or later
D385 10.1.73.16 or later
D713 10.1.73.16 or later
D717 10.1.73.16 or later
D735 10.1.73.16 or later
D785 10.1.73.16 or later
D862 10.1.137.15 or later
D865 10.1.137.15 or later