Install Yeastar Room Display DS7315

This topic describes the hardware overview of Yeastar Room Display DS7315 and gives instructions on how to install, power up , and network a Yeastar Room Display DS7315.

Package contents

Before you begin to install Yeastar Room Display, make sure all of the following items are included in the product package.

Yeastar Room Display DS7315
Mounting Bracket	Wall Mount Screw Kit	Fixing Screws
Optional: PoE Injector	Quick Installation Guide	Warranty Card

Hardware Overview

No. Description ① Camera ② Power Button ③ USB 2.0 ④ Recovery ⑤ Ethernet port （PoE） ⑥ Micro USB OTG ⑦ DC power jack ⑧ VESA 75*75mm

Install Room Display DS7315

1. Position the mounting bracket on the desired height on the wall, and mark the four mounting holes at the corners.	2. Use a 6mm diameter drill bit to drill four holes to a depth of 36mm on the marked locations.
3. Hammer the wall plugs into the holes respectively.	4. Press the mounting bracket on the wall and align its mounting holes with the wall plugs, then fix the screws into the wall plugs.
5. Plug an Ethernet cable into the Ethernet port of the Room Display. And slide the Room Display on the mounting bracket.	6. Secure the Room Display by screwing the two fixing screws into the holes at the bottom of the mounting bracket.

Power supply and network connection

Yeastar Room Display DS7315 can be powered via a PoE injector, PoE switch, or a DC power adapter. Choose one of the following methods to power up the Room Display and connect it to the Internet.

• PoE injector power supply and network connection
• PoE switch power supply and network connection
• DC power adapter power supply and network connection

PoE injector power supply and network connection

1. Powered by a PoE injector:

   1. Connect the Ethernet cable of the Room Display to the Data+Power port of the PoE injector.
   2. Plug the power cable from PoE injector into a power outlet.

   

2. Network connection: Choose one of the following methods to connect the device to the Internet.

   • Wireless network connection:

     1. After the Room Display boots up, tap Configure the System Network on the screen.
     2. Enable Wi-Fi and connect the device to a Wi-Fi network.
     3. Tap the in the bottom bar to access the desktop.
     4. Swipe up the screen and select Meeting Room Display.

   • Wired network connection: Plug an Ethernet cable into the DATA port of PoE injector and connect it to the switch.

PoE switch power supply and network connection

1. Powered by a PoE switch: Connect the Ethernet cable of the Room Display to a PoE switch.
   

2. Network connection: Room Displays powered by a PoE switch are automatically connected to the Internet.

DC power adapter power supply and network connection

1. Powered by a DC power adapter: Connect the DC power jack of the Room Display and the power outlet with a DC power adapter(3.5 X 1.3 mm plug).
   

2. Network connection: Choose one of the following methods to connect the device to the Internet.

   • Wireless network connection:

     1. After the Room Display boots up, tap Configure the System Network on the screen.
     2. Enable Wi-Fi and connect the device to a Wi-Fi network.
     3. Tap the in the bottom bar to access the desktop.
     4. Swipe up the screen and select Meeting Room Display.

   • Wired network connection: Connect the Ethernet cable of the Room Display with a switch.

What to do next

After installation, you can register the Room Display to Yeastar Workplace.