Yeastar P570 Overview

Front panel

Table 1.
No. Description
NFC tag. Tap NFC-capable mobile phone's back against Yeastar logo to quickly configure network settings.
EX30 Expansion Board, which is used to connect an E1/T1/J1 line.

EX08 Expansion Board. Up to 4 modules and 8 RJ11 ports are supported on the expansion board.

The 8 RJ11 ports can be used to connect to different objects:

  • FXS port (green light): For the connection of analog phones or fax machines.
  • BRI port (orange light): For the connection of BRI lines.
  • FXO port(red light): For the connection of PSTN lines or FXS ports of traditional PBX.

Rear panel

Table 2.
No. Feature Description
Reset button Press the button to restore to factory defaults.
System Indicator Indicate the system status.
  • Blinking: The system is working properly.
  • Static/Off: The system goes wrong.
Power Indicator Indicate the power status.
SD Slot Insert an SD card to store recording files, voicemails, or logs.
USB Slot Insert a USB flash drive to storage recording files, voicemails, or logs.
WAN Status Indicator

Indicate the WAN status.

LAN Status Indicator Indicate the LAN status.
Console Connect RS232 line to debug the system.
Power Switch Press this button to switch on/off the device.
Power Inlet Connect the supplied power supply to the port.
Protective Earth Connect to the ground to reduce the risk of electrocution to the user or protect the PBX from bad effects of external noise in case of a lightning strike.
Antenna Socket Rotate the antenna into the Antenna Socket.