Install Yeastar K2 IPPBX System

Installation methods

You have multiple choices to install the Yeastar K2 IPPBX Software:

  • Install the Yeastar K2 IPPBX Software with a USB flash drive.

    Before installing K2 system, you need to write K2 image in a USB.

  • Install the Yeastar K2 IPPBX Software on a virtual machine.

The installation process takes VM installation as an example, the installation process via USB flash drive is the same.

Step 1. Configure language and location

The installer will begin with a prompt to select a language for the installation wizard.
  1. Select a language for the installation wizard.

  2. Select Install Ubuntu Server.

  3. Select a language to be used for the installation process and installed system.

  4. Select your location based on the language you selected.

Step 2. Configure the keyboard

  1. Select NO, not to do keyboard layout detection.

  2. Select a country of origin for the keyboard of this computer.

  3. Select the layout matching the keyboard for your machine.

Step 3. Plan and create partition disk

  1. Select Manual partitioning method.

  2. Select the partition of the virtual machine.

  3. Select Yes to create new empty partition table on this device.

  4. Create partition 1.
    1. Select the FREE SPACE to create partition 1.

    2. Select Create a new partition.

    3. Set the partition size.

      Partition size recommend: 50G.

    4. Choose the partition type as Primary.

    5. Select location for the partition as Beginning.

    6. Set Use as and Mount point for the partition 1, then select Done settings up the partition.
      • Use as: Ext4 journaling file system
      • Mount point: /

  5. Create partition 2.
    1. Select the FREE SPACE to create partition 2.

    2. Select Create a new partition.

    3. Set the partition size.

      Partition size recommend: Minimal 50G + reserved size for storing recording files.

    4. Choose the partition type as Logical.

    5. Select location for the partition as Beginning.

    6. Set Use as and Mount point for the partition 2, then select Done settings up the partition.
      • Use as: Ext4 journaling file system
      • Mount point: /home

  6. Create partition 3.
    1. Select the FREE SPACE to create a new partition.

    2. Select Create a new partition.

    3. Set the partition size.

      Partition size recommend: 10G.

    4. Choose the partition type as Logical.

    5. Select location for the partition as Beginning.

    6. Set Use as and Mount point for the partition 3, then select Done settings up the partition.
      • Use as: swap area

  7. Select Finish partitioning and write changes to disk.

  8. Select Yes, write the changes to disks.

Step 4. Install the IPPBX System

After finishing partitioning and write changes to disk, the virtual machine starts to install the system. Wait for a few minutes for the installation.
  1. Select No automatic updates.
    Important: Do not select other options.

  2. Select Continue to skip this step.

  3. Select Yes to install the GPUB boot loader.

  4. Select Continue to boot into your system.

    When the following screen displays, the IPPBX system is successfully installed.